Home > Dozer Parts > Ground Engaging Tools
Aftermarket Dozer Ground Engaging Tools (G.E.T.) & Wear Parts
When cutting edges wear down, end bits round off, or blade components fail, productivity drops fast. EquipXR supplies aftermarket dozer ground engaging tools (G.E.T.) for all major dozer models. Our aftermarket parts meet or exceed OEM specs for all major dozer manufacturers, including CAT, John Deere, Komatsu, CASE CE, and more.
Our inventory of parts supports both individual replacement wear components and ground-engaging tools for fleet maintenance programs and individual machines. Contact us today to get the parts you need at affordable prices and shipped to you quickly.
Aftermarket Dozer G.E.T. For All Makes & Models
Ground-engaging tools take the direct wear created when your dozer pushes, cuts, grades, rips, and moves material. Keeping these components in good condition helps protect more expensive blade and ripper components while maintaining productive cutting and penetrating performance.
EquipXR supplies aftermarket dozer ground engaging tools (GET) for bulldozers from Caterpillar, John Deere, Komatsu, CASE, Liebherr, Dressta, and other manufacturers. From cutting edges and end bits to ripper tips, shanks, protectors, and mounting hardware, we will find replacement wear parts compatible with your machine and application.
Send us your machine make, model, serial number, OEM part number, or information from the existing part. Our equipment parts team will cross-reference your information and identify the correct replacement parts.
Ground Engaging Tools (G.E.T.)
Dozer ground-engaging tools are replaceable wear components positioned to protect the blade, ripper, or scarifier where they come into contact with the ground. These parts are designed to absorb abrasion and impact so larger, more expensive components do not take the full force of the wear. Staying on top of G.E.T. replacement is one of the simplest ways to protect a far more expensive component and keep the blade cutting clean. EquipXR’s part experts will source individual wear parts, mounting hardware, and complete sets depending on your requirements and application.
Cutting Edges
Cutting edges run the full width of the blade and take the brunt of ground contact. They’re available in standard and through-hardened steel grades (hardened options extend wear life significantly in abrasive applications). Curved or serrated profiles improve soil penetration, while flat profiles reduce impact and abrasion in hard, compacted material. Worn edges will reduce penetration, increase fuel usage, and place additional stress on the blade structure. EquipXR stocks cutting edges for CAT, Komatsu, John Deere, Fiat Allis, and other major manufacturers across a wide range of blade types and widths.
EquipXR supplies:
- Bolt-on cutting edges
- Heat-treated edge systems
- Reversible cutting edges
- Abrasion-resistant wear edges
- Heavy-duty edge kits
Cutting edges are available in different lengths, thicknesses, widths, hole patterns, and material specifications. Depending on the blade and application, reversible cutting edges may also be available. These can be flipped after one edge becomes worn to extend their usable service life.
End Bits
End bits protect the corners of the blade, the highest-wear zones on any dozer blade. They also help maintain blade shape and material retention efficiency. Matching your end bit spec to your cutting edge wear rate keeps the system balanced, reduces the frequency of change-outs, and lowers your overall operating cost. For applications in sand, gravel, or highly abrasive materials, abrasion-resistant material (ARM-equivalent) options provide significantly longer service life at the blade corners. EquipXR can help match replacement end bits based on your blade configuration, dozer model, dimensions, bolt pattern, or OEM reference number.
Sidebar & Blade Wing Protection
The sides of the blade take impact and abrasion that the cutting edge system doesn’t cover. Sidebar protection guards the blade wings against wear in high-impact and rock-heavy applications and increases the effective blade-carrying capacity. Hammerless designs are available so you can weld the adapter once, then swap sidebar protection in the field without hammering. That means less downtime during routine blade maintenance and reduced risk of injury.
Spill guards and side wings improve material retention by helping keep material inside the blade profile during pushing operations. They are commonly used in high-production environments where maximizing load volume matters.
Ripper & Scarifier Attachments
Rippers extend what a dozer is capable of. Before bulk pushing can happen, compacted ground, hardpan, or rock often needs to be broken up first. A properly spec’d ripper makes that work efficient rather than brutal.
Ripper Tips & Scarifier Teeth
Ripper systems help break compacted material, rock, frost, and hard ground before grading or excavation begins. Worn ripper and scarifier teeth reduce penetration efficiency and increase machine strain.
Ripper tips are self-sharpening alloy steel and engineered to withstand the high heat and pressure generated by ripping through compacted or rocky material. Centerline tips are reversible, which doubles usable wear life before replacement. Penetration tips use a more aggressive entry angle for breaking through hard surfaces where standard tips would bounce or stall. EquipXR carries ripper tips for single- and multi-shank ripper configurations across all major dozer brands.
Ripper Shanks
The shank is the structural arm that carries the ripper tip into the ground. It absorbs enormous stress on every pass and wears on the leading and bottom faces over time. EquipXR stocks replacement ripper shanks for the most common CAT, Komatsu, and John Deere ripper configurations, including both single-shank rear rippers and multi-shank setups.
- Multi-Shank Rippers: Multi-shank ripper systems are commonly used in rocky ground, compacted soil, and quarry environments where surface penetration is difficult.
- Single-Shank Rippers: Single-shank systems provide deeper penetration and concentrated breakout force for demanding applications.
Ripper Guards & Shank Protectors
Shank protectors wrap the shank body in the primary wear zone, absorbing abrasion before it reaches the base metal. Replacing a shank protector is a fraction of the cost of replacing the shank itself. If your machine is ripping regularly, running shank protection and staying on a replacement schedule keeps maintenance costs predictable and prevents expensive shank failures in the field.
OEM-Equivalent Wear Parts
Original equipment manufacturer wear parts carry a dealer premium that adds up fast on components designed to wear out and get replaced. EquipXR’s aftermarket G.E.T. and cutting parts are manufactured to meet or exceed OEM specifications. You get the same hardness ratings, dimensional tolerances, and material grades, at a price that makes fleet-scale maintenance sustainable. That covers the full range of blade wear parts:
- Cutting edges in standard and severe-duty grades, in single- and multi-bevel profiles
- End bits matched to blade corner geometry by model
- Carbide-edged cutting parts for high-abrasion applications where standard steel wears too quickly
- Cutting edge supports and wear plates that protect the moldboard
- Sidebar protection and bolt-on wear segments
Every part is cross-referenced by OEM part number, machine model, or serial number range. When you’re not sure which grade or profile fits your machine, our team confirms compatibility before the order ships, so you don’t end up paying twice for the wrong part.
Aftermarket G.E.T. for Leading Bulldozer Manufacturers
EquipXR has a large inventory of ground-engaging tools for many current and legacy crawler dozers.
- Caterpillar Dozer Ground Engaging Tools: Replacement G.E.T. are available for many Caterpillar dozers, including cutting edges, end bits, ripper tips, shanks, protectors, and related hardware.
- John Deere Dozer Ground Engaging Tools: EquipXR offers aftermarket blade and ripper wear parts for many John Deere crawler dozer models and configurations.
- Komatsu Dozer Ground Engaging Tools: Replacement GETs for Komatsu bulldozers includes components for blade cutting systems, rippers, and other ground-contact wear areas.
- CASE Dozer Ground Engaging Tools: We offer cutting edges, end bits, ripper components, and other replacement wear parts for many CASE crawler dozers.
- Liebherr Dozer Ground Engaging Tools: Aftermarket G.E.T. options are available for a range of Liebherr crawler tractors used in earthmoving and heavy production applications.
- Dressta Dozer Ground Engaging Tools: EquipXR sources replacement ground-engaging tools for Dressta dozers, including parts for older machines that may be more difficult to obtain through conventional channels.
- Other Dozer Makes & Models: Need G.E.T. for another manufacturer? Send us the machine information. Our parts network covers a wide range of dozer makes, models, sizes, and production years.
All uses of manufacturer names, model names, brand names, and OEM part numbers are for reference and identification purposes only. EquipXR is not affiliated with, endorsed by, or sponsored by the original equipment manufacturers unless explicitly stated.
Dozer Cutting Edge Sizes, Hole Patterns & Mounting Configurations
Dozer cutting edges are not universal. Even machines within the same model family use different edges depending on the blade type, blade width, production configuration, or attachment setup. For this reason, identifying a cutting edge by appearance alone is not recommended. Important specifications include overall length, edge width, material thickness, number of bolt holes, bolt-hole diameter, hole spacing, countersink configuration, and the location of the first and last mounting holes. The dozer make, model, serial number, and OEM reference number from the existing edge are used to confirm the correct replacement. If an OEM part number is unavailable, accurate measurements and clear photos of the existing edge will help identify the correct replacement.
Cutting Edge Mounting Configuration
Most replaceable dozer cutting edges are mounted along the lower portion of the blade moldboard using a series of bolts. The exact mounting arrangement depends on the blade design. When identifying the mounting configuration, check the number of cutting edge sections, position of each section on the blade, bolt-hole quantity and spacing, single-row or multi-row bolt pattern, bolt and nut size, countersunk hole configuration, edge thickness, bevel direction, section orientation, and the relationship between the cutting edge and end bits. These details become particularly important when the blade has been replaced, modified, or changed during the machine’s service life.
Dozer Blade Parts
The dozer blade assembly includes the larger structural and mounting components that support those wear parts. If you need a dozer blade assembly, moldboard, push arm, C-frame, trunnion, pin, bushing, brace, or another structural blade component, visit our Dozer Blades page.
Frequently Asked Questions
Cutting-edge fitment depends on your blade type (S, U, SU, angle), blade width, and OEM specifications. If you’re replacing a worn edge, you should measure the existing part (thickness, width, and bolt-hole spacing) so we are able to precisely match it. Provide your OEM part number from the machine’s parts manual, or have us look it up based on your dozer’s make, model, and serial number.
There is no single replacement interval for GET. Blade systems and wear components gradually deteriorate under normal operating conditions. Routine inspections help identify problems before they create larger downtime issues. Ignoring wear leads to reduced efficiency, increased fuel consumption, and more expensive structural repairs. Watch for these signs:
- Rounded or thinned cutting edges: A sharp edge slices into material; a rounded one rides over it. If you’re making more passes to move the same dirt, your cutting edge is telling you it’s done.
- Damaged or missing end bits: End bits protect the blade corners, which see the highest concentration of wear. Worn end bits expose the blade structure to direct abrasion.
- Dull, chipped, or broken ripper tips: Tips that no longer penetrate force the machine to work harder and put extra strain on the shank and point adapter behind them.
- Wear progressing past the tip into the adapter or shank: If you’ve run tips too long, wear moves into the parts that cost the most to replace. Replace tips and protectors on schedule to shield the structural components.
- Uneven grading or poor material retention: A blade that won’t hold a load or leaves an inconsistent grade often points to worn wear plates, sidebar protection, or a compromised cutting edge profile.
The best practice is to inspect G.E.T. at every scheduled service interval and replace them before wear reaches the blade body. Running G.E.T. to failure means your blade base starts taking the abuse, which is a far more expensive repair.
The clearest signal that it may be time for a replacement is a visible reduction in material thickness along the cutting edge. Other indicators include the machine working noticeably harder to cut into the same material, decreased grading accuracy, or the blade starting to ride up over material instead of cutting through it.
In soft soil or finish-grading work, cutting edges last for hundreds of hours. In rock, abrasive gravel, or hardpan, wear is significantly faster. Many operators replace end bits more frequently than cutting edges, since corners wear faster than the center of the blade.
Standard cutting edges work fine for light-to-moderate applications with minimal abrasion. Through-hardened edges that are rated to 400–500 Brinell hardness will last significantly longer in abrasive conditions like sand, gravel, shot rock, and demolition debris.
Abrasion-resistant material (ARM-equivalent) options with tungsten carbide particles bonded to the wear surface push that further, offering up to five times the wear life of standard edges in the most demanding applications. The higher upfront cost of hardened G.E.T. almost always delivers a lower cost per hour in abrasive work.
Yes. EquipXR stocks ripper shanks for both single-shank rear rippers and multi-shank configurations across most major dozer models. We also carry shank protectors, which we strongly recommend running on any machine doing regular ripper work to absorb the wear so the shank doesn’t.
Yes, EquipXR’s aftermarket ground engaging tools are manufactured to match OEM dimensional tolerances, bolt hole patterns, and material specifications. Cutting edges and end bits are designed to bolt directly to your existing blade and edge support without modification for easy cutting edge installation. The key is confirming the right part number and equipment model before ordering to ensure fitment and compatibility.
Uneven wear results from working repeatedly with one side of the blade loaded more heavily, operating on sloped surfaces, incorrect blade positioning, loose hardware, bent or damaged blade components, or differences in the material contacting each side of the machine. When one cutting edge or end bit consistently wears much faster than the others, inspect the blade and mounting system instead of simply replacing the worn component.
Some dozer cutting edges are reversible and can be flipped to use the second wear surface. Whether an edge is reversible depends on its design and wear condition. Do not wait until wear reaches the bolt holes, mounting surface, or blade base edge before flipping or replacing it.
With 50,000+ parts stocked across multiple U.S. warehouses, most in-stock orders ship the same or next business day. Shipping timelines depend on your location and the specific parts ordered, but we prioritize fast fulfillment because we know a dozer sitting idle waiting on a cutting edge is costing real money. Expedited shipping options are available, and our team will give you an honest lead time before you commit to an order.
Aftermarket Parts For The Rest Of Your Dozer
EquipXR offers more than just ground-engaging tools and replacement wear parts. We supply aftermarket replacement parts across the major systems of crawler dozers, making it easier to find components for maintenance, repairs, and larger rebuilds.
- Dozer Blade Parts: S-Blades, U-Blades, PAT-Blades, moldboards, push arms, C-frames, and trunnions.
- Undercarriage Parts: Rollers, idlers, track adjusters, recoil springs, final drives, sprockets, and segments.
- Track Parts: Track chains, track shoes in standard, LGP, and SALT configurations.
- Hydraulic System Components: Cylinders, seal kits, pumps, valves, and hoses for blade lift, tilt, and ripper circuits.
- Transmission Parts: Filters, water pumps, turbos, torque converter components, and steering clutch parts.
- Engine Parts: Engine rebuild kits, engine blocks, turbos, filters, and engine seals, gaskets, and hardware.
- Operator & Cab: Glass, seats, HVAC components, switches, and gauges.
Whether you need a single wear part or components for a larger repair, send us your machine information and the parts you need. Every category is cross-referenced by our parts experts to match your make, model, and serial number.
Why Source Aftermarket Wear Parts and G.E.T. from EquipXR?
OEM blade components and G.E.T. carry a premium that adds up fast, especially on high-wear parts that need regular replacement. EquipXR’s aftermarket options are manufactured to meet or exceed OEM hardness ratings, dimensional tolerances, and material specifications, at a cost that makes individual equipment or fleet-scale maintenance sustainable.
OEM-Equivalent Quality
Every wear component and G.E.T. item in our catalog is sourced to meet OEM dimensional specs, bolt patterns, material hardness ratings, and profiles.
Wide Range of G.E.T.
EquipXR can supply all of your cutting edges, end bits, ripper tips, shanks, protectors, scarifier teeth, wear plates, bolts, retainers, and related hardware needs from a single ordering source.
Parts Support Expertise
Our equipment experts will match the right parts to your application using your make, model, serial number, blade configuration, dimensions, or existing part information.
Legacy Machine Support
Replacement wear parts for newer machines, as well as many older and legacy models. Our parts experts source parts for discontinued and hard-to-find dozer models.
Competitive Pricing
EquipXR’s aftermarket pricing runs significantly below dealer list on most wear parts and G.E.T. components, which matters when you’re replacing cutting edges multiple times per year across a fleet.
Get a Quote on Aftermarket G.E.T. & Wear Parts
Keep your dozer working with replacement ground-engaging tools and wear parts from EquipXR. We have a large inventory of cutting edges, end bits, ripper tips, shanks, protectors, scarifier teeth, wear plates, mounting hardware, and other high-wear components for dozers from major manufacturers.
Send us your dozer make, model, serial number, OEM part number, or part dimensions, and our equipment parts team will help identify compatible aftermarket options. Whether you need one replacement wear part, a complete set of G.E.T., or parts for multiple machines, request a quote from EquipXR today.